Free shipping by FedEx Ground for orders over $100
Free shipping by FedEx Ground for orders over $100

Audio-technica Atw-r250 Receiver With Atw-t201 Transmitter Body Pack


LOADING IMAGES
Audio-technica Atw-r250 Receiver With Atw-t201 Transmitter Body Pack Audio-technica Atw-r250 Receiver With Atw-t201 Transmitter Body Pack

The Audio Technica Atw-R250 reciever and Atw-201 Transmitter Body Pack Wireless system is designed to provide reliable performance while still being user friendly. A performer can always depend on this system to sound clear, natural sounding, and to have consistent levels. The Atw-R250 receiver is a single channel, non-dynamic receiver with an advanced dipole antenna design for extended signal range. This receiver offers volume control, Af peak, and RF and Power indicator lights.




OVERALL SYSTEM SPECIFICATIONS
Operating FrequencyVHF high band, 169 MHz to 172 MHz
Number of ChannelsFixed channel
Frequency Stability±0.005%
Modulation ModeFM
Maximum Deviation±15 kHz
Operating Range200' minimum
Operating Temperature Range40° F (4° C) to 110° F (43° C)
Frequency Response80 Hz to 13 kHz
RECEIVER SPECIFICATIONS
Receiving SystemNon-diversity, single-channel, dual antenna system
Image Rejection50 dB minimum
Signal-to-noise Ratio80 dB at 10 kHz deviation (IEC-weighted), maximum modulation 15 kHz
Total Harmonic Distortion<=1% (10 kHz deviation at 1 kHz)
Sensitivity20 dBµV for 60 dB S/N (IEC-weighted)
Audio Output350 mV (1 kHz modulation, 10 kHz deviation, 100 k ohm load)
Output Connector1/4" TS ("mono") phone jack
Power Supply120V AC 60 Hz, 6 VA; or 12V DC, 200 mA, center positive, with external DC supply
Dimensions8.27" (210.0 mm) W x 
1.72" (43.5 mm) H x 
4.73" (120.0 mm) D
Net Weight18.9 oz (536 g); without AC adapter, 11.9 oz (336 g)
Accessories IncludedAD1202A 120V docking AC adapter; 120V AC IEC cordset
BODY-PACK TRANSMITTER SPECIFICATIONS
RF Power Output10 mW High position, 2 mW Low position, typical
Spurious EmissionsUnder federal regulations
Dynamic Range>=90 dB, A-weighted
Input ConnectionsHigh impedance, low impedance, bias
Battery9V (NEDA type 1604) alkaline, not included
Current Consumption30 mA typical
Battery LifeApproximately 15 hours in High position; 
Approximately 20 hours in Low position 
(depending on battery type and use pattern)
Dimensions2.56" (65.0 mm) W x 
4.33" (110.0 mm) H x 
1.00" (25.4 mm) D
Net Weight2.8 oz (78 g)

HANDHELD TRANSMITTER SPECIFICATIONS
RF Power Output10 mW High position, 2 mW Low position, typical
Spurious EmissionsUnder federal regulations
Dynamic Range>=90 dB, A-weighted
Microphone ElementDynamic unidirectional
Battery9V (NEDA type 1604) alkaline, not included
Current Consumption30 mA typical
Battery LifeApproximately 15 hours in High position; 
Approximately 20 hours in Low position 
(depending on battery type and use pattern)
Dimensions9.50" (241.3 mm) long, 
2.10" (53.3 mm) diameter
Net Weight12.7 oz (360 g)
Accessory IncludedAT8456a Quiet-Flex™ stand clamp

Write a review

Please login or register to review

  • Daily Rental Price: 4.00
  • 3 Day Rental Price: 6.00
  • Weekly Rental Price: 8.00
  • Monthly Rental Price: 16.00